Gear Double L; Gear Double R - Star Micronics LS-5 SERIES Technical Manual

REPLACEMENT AND ADJUSTMENTS OF PARTS

3-2. Gear Double L

(1) Open the front cover assembly [1].
(2) Remove the following units:
• C ring [2]
• Gear double L [3]
Pressing the left end of the lower chute assembly
[4] onto the inlet chute assembly and pick up roll
assembly, remove the gear double L [3].
Caution when assembling:
Open the front cover assembly [1] all the way, and bring the
lower chute assembly [4] forward. With the left end of the
lower chute assembly [4] pressed against the inlet chute
assembly and pick up roll assembly, match up the position-
ing boss [5] on the gear double L [3] with the horizontal part
of the ROS assembly [6], and attach the gear double L [3].

3-3. Gear Double R

(1) Open the front cover assembly [1].
(2) Remove the following units:
• C ring [2]
• Gear double R [3]
With the right end of the lower chute assembly [4]
pressed against the inlet chute assembly and pick
up roll assembly, remove the gear double R [3].
Caution when assembling:
Open the front cover assembly [1] all the way, and bring the
lower chute assembly [4] forward. With the right end of the
lower chute assembly [4] pressed against the inlet chute
assembly and pick up roll assembly, match up the position-
ing boss [5] on the gear double R [3] with the horizontal part
of the ROS assembly [6], and attach the gear double R [3].
– 32 –