Electrical Box Cover; Earth Plate Assembly - Star Micronics LS-5 SERIES Technical Manual

REPLACEMENT AND ADJUSTMENTS OF PARTS

5-7. Electrical Box Cover

(1) Remove the following units:
• Fuser assembly (according to the procedure
described in section 4-1)
• ESS assembly (according to the procedure
described in section 5-5)
• Connector (P/J119) [1]
• Exit sensor [2]
• Two screws [3]
• Five screws [4]
• Six screws [5]
• Electrical box cover [6]
• Bush [7]

5-8. Earth Plate Assembly

(1) Remove the following units:
• Electrical box cover (according to the procedure
described in section 5-7)
• Two connectors (P/J CR, P/J DB) [1]
• Link assembly [2] (according to the procedure
described in section 3-1)
• Two screws [3]
• Earth plate assembly [4]
Caution when assembling:
Wire the harness on the inner side of the earth plate
assembly [4], and make sure it doesn't interfere with the
movement of the link assembly [2].
– 48 –