REPLACEMENT AND ADJUSTMENTS OF PARTS
3.
Paper Transportation
3-1. Link Assembly
(1)
Remove the following units:
• Left cover (according to the procedure described
in section 1-3)
• Two screws [1]
• Link assembly [2] from the ROS assembly [3]
Close the front cover assembly [4] somewhat, and
remove the link assembly [2] from the ROS
assembly [3].
The link assembly [2] remains attached to the
front cover assembly [4] even after the link as-
sembly [2] has been removed from the ROS
assembly [3], so be careful not to damage it.
Expand the link spring [5], then remove the link
(2)
assembly [2].
– 31 –