REPLACEMENT AND ADJUSTMENTS OF PARTS
5.
Drive & Electrical
5-1. Drive Assembly
(1)
Remove the following units:
• Fuser assembly (according to the procedure
described in section 4-1)
• ESS assembly (according to the procedure
described in section 5-5)
• Electrical box cover (according to the procedure
described in section 5-7)
• Connector (P/J14) [1]
• Screw [2]
• Three screws [3]
• Drive assembly [4]
Caution when assembling:
Be careful that the drive assembly harness doesn't get
caught in other parts.
5-2. CRU Sensor PCB
(1)
Remove the following units:
• Fuser assembly (according to the procedure
described in section 4-1)
• ESS assembly (according to the procedure
described in section 5-5)
• Electrical box cover (according to the procedure
described in section 5-7)
• Connector (P/J118) [1]
• CRU sensor cover [2]
• Screw [3]
• CRU sensor PCB [4]
– 45 –