P/J List - Star Micronics LS-5 SERIES Technical Manual

MAINTENANCE GUIDE

4-2. P/J List

Coordinates of connectors corresponding to "4-1. P/J Layout Drawing" are shown below.
Coordi-
P/J
nates
• P/J in LVPS assy
• For use in thermistor of temp.
2 13
sensor assy
• P/J on MCU PCB
11 G5
• P/J on MCU PCB
12 E6
• P/J on MCU PCB
13 E6
• P/J on MCU PCB
14 E5
• P/J on MCU PCB
15 F5
• P/J on MCU PCB
16 F5
• P/J on MCU PCB
17 F5
• P/J on MCU PCB
18 E5
• P/J on MCU PCB
19 G5
• P/J on MCU PCB
21 F5
• Connection between MCU
31 G6
PCB and main logic board
• P(plug) on MCU PCB
32 E6
• For test print use
• P/J on main logic board
• For use in power supply for
51 I4
main logic board
• Connection between LVPS
101 I3
assy and fuser assy
• P/J on HVPS
111 F5
• P/J of the rear side of ROS
112 F14
assy
Note 1: While P/J2 is in LVPS assy, silk print on LVPS assy board is indicated as "P12."
Note 2: P/J115, P/J201 and P/J202 are in both tray 1 (upper feed unit) and tray 2 (lower feeder unit: optional).
Note 3: Descriptions of P/J Layout Drawings concerning the main logic board, transit board, RAM board and ROM
board MS are omitted.
Remark
– 62 –
Coordi-
P/J
nates
• P/J of the left side of ROS
113 H12
assy
• P/J of ROS assy bottom
114 F13
• Connection between main-
E27
frame and feeder assy
115
• Connection between feeder
E28
assy and optional feeder unit
• P/J on feeder PCB
116 E28
• P/J on CRU sensor PCB
118 H3
• P/J of exit sensor
119 G3
• P/J of regi. sensor
120 F20
• P/J of MBF sensor
121 G20
• P/J on feeder PCB
F28
201
• P/J on feeder PCB AUX
F29
• P/J on feeder PCB
F28
202
• P/J on feeder PCB AUX
F29
• Connection between MCU
301 E19
PCB and pick up solenoid
• P/J on feeder HVPS
CR G4
• P/J on feeder HVPS
DB E4
• P/J on feeder HVPS
TR F4
• A pair of P/J on HVPS
RTN E5
• P/J on the back of trans. chute
TR-T H19
assy
Remark