H3C S5600 SERIES Operation Manual page 1013

To do...
Configure the probe timeout
time
Start the test
Display test results
3) Configuring FTP test on HWPing client
Follow these steps to configure FTP test on HWPing client:
To do...
Enter system view
Enable the HWPing client
function
Create a HWPing test group
and enter its view
Configure the test type
Configure the destination IP
address
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Use the command...
timeout time
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
test-type ftp
destination-ip ip-address
source-ip ip-address
source-port port-number
count times
history-records number
frequency interval
timeout time
1-7
Remarks
Optional
By default, a probe times out in
three seconds.
Required
Required
You can execute the command
in any view.
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is
ICMP.
Required
By default, no destination
address is configured.
Required
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Optional
By default, each test makes
one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.