Xerox Phaser 6130 Service Manual page 220

General Troubleshooting
Drum Erase Lamp (Y/M/C)
4-36
Caution
When performing this procedure, remove and cover the Imaging Unit to
avoid exposure to light.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Imaging Unit (page 8-8).
4. Use a paper clip to secure the Interlock Switch.
5. Perform the Drum Erase Lamp YMC test:
Drum Erase Lamp YMC.
6. Verify that the Lamps are operating.
7. Press the Cancel button to stop the Drum Erase Lamp YMC test.
8. Remove the paper clip from the Interlock Switch.
Engine Diag
Phaser 6130 Color Laser Printer Service Manual
> Motor Test >
Cyan
Erase Lamp
Magenta
Erase Lamp
Yellow
Erase Lamp
s6130-200