Xerox Phaser 6130 Service Manual page 300

Print-Quality Troubleshooting
5-60
Troubleshooting Procedure Table (continued)
Step Actions and Questions
4 Does the mis-registration (color shift)
appear on the printed material when
printing?
5 Open and close the Front Cover.
Does the Front Cover latch closed
properly?
6 Open and close the Front Cover.
Does the mis-registration (color shift)
appear on the printed material when
printing?
7 Reseat the Imaging Unit.
Does the mis-registration (color shift)
appear on the printed material when
printing?
8 Open and close the Front Cover to
reseat the Transfer Unit.
Does the mis-registration (color shift)
appear on the printed material when
printing?
9 Set the printer to adjust the color
registration automatically:
Admin Menu > Maintenance Mode >
Automatic Registration
Does the mis-registration (color shift)
appear on the printed material when
printing?
9 Adjust the color registration manually:
Menus > Admin Menu > Maintenance
Mode > Adjust Color
(Refer to the Phaser 6130 User Guide.)
Does the mis-registration (color shift)
appear on the printed material when
printing?
10 Replace the Imaging Unit (page 8-8).
Is the image printed correctly?
11 Replace the Transfer Unit (page 8-41).
Does the mis-registration (color shift)
appear on the printed material when
printing?
12 Replace the MCU Board (page 8-59).
Does the mis-registration (color shift)
appear on the printed material when
printing?
Yes
Go to step 5.
Complete
Go to step 7.
Go to step 8.
Go to step 8.
Go to step 9.
Menus >
Adjust.
Go to step 10.
Registration.
Go to step 11.
Go to step 12.
Replace the
printer.
Phaser 6130 Color Laser Printer Service Manual
No
Complete
Replace any
defective parts,
then go to step
6.
Complete
Go to step 8.
Complete
Complete
Complete
Complete
Complete
Complete