Xerox Phaser 6130 Service Manual page 132

Error Messages and Codes
3-30
Troubleshooting Procedure Table (continued)
Step Actions and Questions
4 Check the Main Motor (Main Drive
Assembly) for operation
Perform the Main Motor (FULL2) test
(page 4-27): Service Mode
Diag > Motor Test
(FULL2). During this check, defeat the
Front Cover interlock switch.
Does the Main Motor (Main Drive
Assembly) operate properly?
5 Check the Feed Drive Assembly for
operation
Perform the Regi Clutch test
(page 4-33): Service Mode
Diag > Motor Test
During this check, defeat the Front
Cover interlock switch.
Do the Registration and Metal
Registration Rollers rotate properly?
Check the paper feeding position
6
Is the paper not fed from the Tray?
7 Check after resetting the Side Guides
and End Guide on the Tray.
Reset the Side Guides and End Guide,
and reseat the Tray in the printer
correctly.
Does the error still occur when
printing?
Check the Separator Roller Assembly
8
on the Tray for shape and rotation
Pull the Tray out from the printer.
Is the Separator Roller Assembly not
contaminated and/or damaged, and
rotated smoothly?
Check the Feed Roller Assembly for
9
shape and rotation
Pull the Tray out of the printer.
Is the Feed Roller Assembly free of
contamination and/or undamaged, and
does it rotate smoothly?
Check the Feed Solenoid for operation
10
Perform the Tray Feed Solenoid (Auto)
test (page 4-34): Service Mode
Engine Diag > Motor Test
Solenoid (Auto).
During this check, defeat the Front
Cover interlock switch.
Does the Feed Solenoid operate
properly?
Yes
Go to step 5.
> Engine
> Main Motor
Go to step 6.
> Engine
> Regi Clutch.
Go to step 7.
Go to step 8.
Go to step 9.
Go to step 10.
Replace the
Paper Tray
> (CASSETTE
> Tray Feed ASSY 250).
Phaser 6130 Color Laser Printer Service Manual
No
Go to step 16.
Go to step 26.
Go to step 11.
Complete
Replace the
Separator Roller
Assembly
(page 8-7).
Replace the
Feed Roller
Assembly
(page 8-30).
Go to step 18.