Xerox Phaser 6130 Service Manual page 135

Phaser 6130 Color Laser Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
26 Check the connectors of the Drive
Clutch Assembly (Regi Clutch) for
connection
Check the connections between the
MCU Board and Drive Clutch
Assembly.
Are P/J26 and P/J262 connected
correctly?
Check the power to the Drive Clutch
27
Assembly
Disconnect J26 from the MCU Board.
Is the voltage across P26-4 <=>
ground on the MCU Board, about +24
VDC when the Front Cover interlock
switch is pushed?
Check the Drive Clutch Assembly for
28
resistance
Disconnect P/J262 of the Drive Clutch
Assembly.
Is the resistance across J262-1 and
J262-2 approximately 280-ohm?
Error Messages and Codes
Yes No
Go to step 27. Reconnect the
connector(s) P/
J26 and/or P/
J262 correctly.
Go to step 28. Replace the
MCU Board
(page 8-59).
Replace the Replace the
MCU Board Drive Clutch
(page 8-59). Assembly Kit
(page 8-21).
3-33