Mpc Errors; Mpc Error - Xerox Phaser 6130 Service Manual

Error Messages and Codes

MPC Errors

MPC Error

Applicable Chain Link
Initial Actions
3-50
Multi-Protocol Network Card error occurs.
016-738: MPC Error (Download Initial Error)
016-739: MPC Error (Reseat MPC)
016-740: MPC Communication Error
018-310: MPC Error (NIC Controller Communication)
018-311: MPC Error (NIC Flash ROM Boot Module Checksum Error)
018-312: MPC Error (......)
018-313: MPC Error (NIC Flash ROM Application Module Checksum
Error)
018-314: MPC Error (NIC MAC Address Checksum Error)
018-315: MPC Error (NIC Ethernet BIST Parity/RAM R/W Error)
018-316: MPC Error (NIC Internal Loopback Error)
018-317: MPC Error (NIC Fatal Error)
116-333: MPC Error (PCI Option #0 Failure)
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Multi-Protocol Network Card
(Option), PL8.1.11
Image Processor Board, PL8.1.9
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the Multi-Protocol Network
Card (MPC) for correct installation. Is
the MPC correctly installed?
Does the error still occur?
2
3 Replace the Multi-Protocol Network
Card (page 8-62).
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Go to step 3.
Replace the
Image
Processor Board
(page 8-60).
Phaser 6130 Color Laser Printer Service Manual
No
Reseat the
MPC. Go to step
2.
Complete.
Complete.