Color Registration - Xerox Phaser 6130 Service Manual

Color Registration

Phaser 6130 Color Laser Printer Service Manual
A printed yellow or black image is not overlapped on a cyan or magenta image
correctly.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Imaging Unit (PL4.1.21)
Fuser (PL6.1.1)
Transfer Unit (PL6.1.7)
MCU Board (PL8.2.13)
Troubleshooting Procedure Table
Step Actions and Questions
1 Cycle the printer power OFF, then ON.
Does the mis-registration (color shift)
appear on the printed material when
printing?
2 Print the Windows test page.
Is the image printed correctly?
3 Check the paper being used and its
condition.
Is the paper dry and recommended
paper?
Print-Quality Troubleshooting
Example Print
ABCDE abcde 12345
Yes No
Go to step 2. Complete
Check the Go to step 3.
printing data for
errors.
Go to step 5. Replace with
dry, approved
paper, then go to
step 4.
s6180-331
5-59