Transfer Unit - Xerox Phaser 6130 Service Manual

Transfer Unit

(PL6.1.7)
Phaser 6130 Color Laser Printer Service Manual
1. Remove the Front Cover (page 8-19).
2. Secure the Transfer Unit to the printer with rubber bands.
Caution
When performing the next step, take care not to scratch the belt
surface of the Transfer Unit.
3. Use a miniature screwdriver to release the Harness 2 Cover hook, then
remove the Harness 2 Cover.
Note
When performing the next step, leave the relay connector on the
Transfer Unit harness side.
4. Release the harness from the pegs of the Transfer Unit, then unplug the
Transfer Unit connector (P/J281).
5. Release the harness coming from printer from hook of the Transfer Unit.
Service Parts Disassembly
s6130-111
8-41