Xerox Phaser 6130 Service Manual page 206

General Troubleshooting
Cover Open Sensor
4-22
Caution
When performing this procedure, remove the Imaging Unit to avoid
exposure to light.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Imaging Unit (page 8-8) and place in a dark location.
4. Perform the Interlock Switch test:
Open Sensor.
5. Open and close the Front Door while checking the information on the
Control Panel display. The Low and High values change from 0 up to 99.
Control Panel
Interlock Switch
L-0
6. Press the Cancel button to stop the Cover Open Sensor test.
Engine Diag > Sensor Test
Normal
Interlock Switch
H-0
Phaser 6130 Color Laser Printer Service Manual
> Cover
s6130-186