Abnormal Noise During Standby - Xerox Phaser 6130 Service Manual

Abnormal Noise During Standby

Phaser 6130 Color Laser Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
6 1. Reseat the Imaging Unit.
2. Perform the Sub Motor test (page 4-28):
Service Mode
Test > Sub Motor
Is the noise still present?
Warning: Start the operation after the Fuser
7
has cooled down.
1. Reseat the Fuser.
2. Perform the Sub Motor test (page 4-28):
Service Mode
Test > Sub Motor
Is the noise still present?
8 1. Reseat the Sub Drive Assembly.
2. Perform the Sub Motor test (page 4-28):
Service Mode
Test > Sub Motor
Is the noise still present?
Troubleshooting Reference Table
Applicable Parts
Fan (PL8.1.1)
LVPS Board (PL8.2.1)
Troubleshooting Procedure Table
Step Actions and Questions
Perform the Fan HIGH test (page 4-31):
1
Service Mode > Engine Diag
> Fan HIGH.
Is the noise coming from the Fan?
> Engine Diag > Motor
FULL2.
> Engine Diag > Motor
FULL2.
> Engine Diag > Motor
FULL2.
Wiring and Plug/Jack Map References
> Motor Test
General Troubleshooting
Yes No
Go to step 7. Complete
Go to step 8. Complete
Try replacing Complete
one after
another:
Imaging
Unit
(page 8-8)
Fuser
(page 8-9)
Sub Drive
Assembly
(page 8-53).
Yes No
Replace the Replace the
Fan. LVPS Board.
(page 8-56) (page 8-55)
4-45