Xerox Phaser 6130 Service Manual page 292

Print-Quality Troubleshooting
5-52
Troubleshooting Procedure Table (continued)
Step Actions and Questions
3 Check the paper being used and its
condition.
Is the paper dry and recommended
paper?
Is the image printed correctly?
4
Open and close the Front Cover.
5
Does the Front Cover latch closed
properly?
Is the image printed correctly?
6
Reseat the Imaging Unit.
7
Is the image printed correctly?
8 Open and close the Front Cover to
reseat the Transfer Unit.
Is the image printed correctly?
Is the skewed paper being fed from the
9
Manual Feed Slot?
10 Check the setting of the Manual Feed
Slot side guides and reset the side
guides if needed.
Is the image printed correctly?
11 Inspect the paper path.
Is there toner contamination on the
paper path?
12 Is the image printed correctly?
Reseat the Paper Tray.
13
Is the image printed correctly?
Reseat the paper in the Paper Tray.
14
Is the image printed correctly?
15 Reset the Paper Tray side guides.
Is the image printed correctly?
Reseat the Separator Roller Assembly.
16
Is the image printed correctly?
17 Replace the Separator Roller
Assembly (page 8-7).
Is the image printed correctly?
Replace the Feed Roller (page 8-30).
18
Is the image printed correctly?
Yes
Go to step 5.
Complete
Complete
Complete
Complete
Complete
Go to step 10.
Complete
Clean the paper
path (refer to
"Cleaning" on
page 7-2), then
go to step 12.
Complete
Complete
Complete
Complete
Complete
Complete
Complete
Phaser 6130 Color Laser Printer Service Manual
No
Replace the
paper with a
new dry and
recommended
one, then go to
step 4.
Go to step 5.
Replace the
defective parts,
then go to step
6.
Go to step 7.
Go to step 8.
Go to step 9.
Go to step 14.
Go to step 11.
Go to step 13.
Go to step 13.
Go to step 14.
Go to step 15.
Go to step 16.
Go to step 17.
Go to step 18.
Go to step 19.