Horizontal Stripes - Xerox Phaser 6130 Service Manual

Horizontal Stripes

Phaser 6130 Color Laser Printer Service Manual
There are black lines running parallel with the leading edge of the print,
perpendicular to the direction of the paper travel.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Laser Unit Kit (PL4.1.99)
Imaging Unit (PL4.1.21)
Toner Cartridge K (PL5.1.21)
Toner Cartridge C (PL5.1.22)
Toner Cartridge M (PL5.1.23)
Toner Cartridge Y (PL5.1.24)
Fuser (PL6.1.1)
Transfer Unit (PL6.1.7)
IP Board (PL8.1.9)
MCU Board (PL8.2.13)
Warning
To prevent burns, allow the Fuser to cool down before starting the
procedure.
Troubleshooting Procedure Table
Step Actions and Questions
1 Run the Contamination Check test
print:
Contamination Chk
Compare any horizontal dropout
bands with the Pitch Chart
(page 5-21).
Do any of the horizontal bands match
the chart?
Example Print
Service Mode > Test Print >
Print-Quality Troubleshooting
ABCDE abcde 12345
Yes No
Replace the Go to step 2.
corresponding
parts.
s6180-323
5-37