Random Spots - Xerox Phaser 6130 Service Manual

Print-Quality Troubleshooting

Random Spots

Initial Actions
5-42
There are spots of toner randomly scattered across the page.
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Laser Unit Kit (PL4.1.99)
Imaging Unit (PL4.1.21)
Transfer Unit (PL6.1.7)
IP Board (PL8.1.9)
MCU Board (PL8.2.13)
Warning
To prevent burns, allow the Fuser to cool down before starting the
procedure.
Troubleshooting Procedure Table
Step Actions and Questions
1 Inspect the paper transfer path.
Is there any contamination on the
paper transfer path?
2 Is the image printed correctly?
Example Print
ABCDE abcde 12345
Yes
Clean the paper
path (refer to
"Cleaning" on
page 7-2), then
go to step 2.
Complete
Phaser 6130 Color Laser Printer Service Manual
s6180-325
No
Go to step 3.
Go to step 3.