Resetting The Fuser - Xerox Phaser 6130 Service Manual

Resetting the Fuser

Phaser 6130 Color Laser Printer Service Manual
Vertical Registration
Section 2 of the Color Registration Correction Chart displays three columns of
color. In the center of each column is a wavy white column. This column of
white needs to be centered as much as possible at 0.
To determine correction values for use in Vertical Registration adjustment,
choose the value from each column that is best centered on the wavy white
column.
To enter the correction values:
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button to find
Press the OK button.
5. Press the Up Arrow or Down Arrow button to find
the OK button.
6. Press the Up Arrow or Down Arrow button to find
OK button.
7. Use the Up Arrow or Down Arrow button to enter the values and the
Right Arrow button to move from Y to M to C.
8. Repeat step 7 to continue adjusting the color registration.
9. Press the OK button twice to print the Color Registration Correction Chart
with the new values. The color registration adjustment is complete when
the columns of white are centered, as much as possible, on 0.
Fuser reset is required when a new Fuser is installed into the printer. This
function sets the life counter to "0."
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button to find
the OK button.
5. "Are you sure?" message is displayed. Press the OK button to start the
process.
6. Initializing... --> Initialized
Mode - Reset Fuser
messages are displayed. The
menu is displayed when the process is completed.
Adjustments and Calibrations
Admin Menu. Press
Maintenance Mode.
Adjust Color Regi.
Enter Number. Press
Slow Scan. Press the
Admin Menu. Press
Maintenance Mode.
Reset Fuser. Press
Maintenance
6-5