Vigil Server Configuration - Network Camera Settings - 3xLogic VX-2A-B-IWD User Manual

VIGIL SERVER CONFIGURATION – NETWORK CAMERA SETTINGS
The Network Camera Settings window is where the direct configuration of the 3xLOGIC All-in-One
camera will take place.
Steps:
1). Fill in all the required information and press OK.
2). After the Network Camera Settings window closes,
click OK or Apply to save the settings in VIGIL Server.
VIGIL Server is able to receive video from one or many network
cameras connected to the LAN or WAN. VIGIL Server currently
supports several types of network cameras aside from 3xLOGIC
All-in-One Cameras.
To edit a network camera at any time after initial configuration:
Steps:
1). Access VIGIL Server Settings>Camera Setup Tab, select
the desired network camera and click the Network
Camera Settings button. This will open the Network
Camera Settings window.
NOTE:
The Network Camera feature disables the physical camera input
on video capture cards for the selected camera channel.
Field Description
Type
The type of network camera.
The IP or HTTP address of the camera. It is not necessary to include http:// at
Address
the beginning of the HTTP address.
Web/Camera Connects to the camera's web interface to make changes to the camera's
Settings
internal settings.
Data / RTSP Port
The network ports used to connect with the camera.
Some Network Camera types also support Encoders. Select the Camera number
Camera Number
on the encoder to use for this network camera.
Set this to the camera URL, if applicable. For 3xLOGIC All-in-One cameras, the url
URL
will be automatically set to rtsp:// [ip address] /ch0_unicasy_firststream
Stream Type
Select the video stream type for the camera: MPEG4, JPEG, or H264.
The number of seconds to attempt to connect to the camera before timing out.
Timeout
If the timeout is reached, "Signal Loss" displays in the Live Viewer window.
The user name and password to connect to the camera. The default values are
User/Password
automatically entered.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Figure 4-17: Network Camera Settings Window
27