Modify A User; Remove A User; Video - 3xLogic VX-2A-B-IWD User Manual

MODIFY A USER

Steps:
1). Click the Modify...button to modify an existing user profile. The Modify User form (pictured
right) will deploy.
Form Field
Username and Password
Confirm Password
User Group
2). After finishing configuration, click Apply to save the new settings.

REMOVE A USER

Steps:
1). Click the Remove button to remove an existing user profile. This action is only available when
a user profile is selected in the list.
2). You will be prompted for a confirmation before finalizing the removal.

VIDEO

Steps:
1). Opening the Basic Tab>Camera Configuration drop-down menu and clicking the Video link will
open the Video settings page.
From the Video page, a user may edit a camera's Main Stream and Sub Stream video settings.
Stream Settings Description
Enable Streaming Check this box to enable the chosen stream.
Set the chosen stream's resolution. Full-resolution is generally reserved for
Resolution main-stream. A smaller, less data-intensive resolution is generally reserved for
sub stream.
Set the camera's maximum Frames-Per-Second value. A higher FPS is generally
Max FPS reserved for main stream, while a lower, less data-intensive value is generally
reserved for sub stream.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Enter a username and
password for the new user.
Confirm the previously
entered password.
Choose a User Group for
the user.
Figure 5-6: Basic Tab – Camera Configuration – Video Settings
Figure 5-5: Modify a User
41