7 Setup (Advanced) Tab
To configure advanced device settings, select the Setup (displayed as Advanced on some firmware
versions) tab.
The left-side drop-down menu will now be populated with several new settings categories for advanced
users wishing to customize advanced image/video, network, event, VCA and maintenance settings.
7.1 Basic Configuration Menu
USERS
Steps:
1).
Opening the Setup Tab>Basic Configuration drop-down menu and clicking the Users link will
open the Users settings page.
Figure 7-2: Setup Tab – Basic Configuration Menu – Users Settings
2).
From the Users page, a user may view the camera's list of user profiles. A user may also add,
modify or remove a user profile. Details regarding each action are outlined in the proceeding
sub-sections of this manual. User settings can also be edited from the Basic Tab>Camera
Configuration>Users settings page.
ADD A USER
Steps:
1).
Click the Add... to add a new user profile. The Add User form (pictured right) will deploy.
Form Field
Username and Password
Confirm Password
User Group
2).
After finishing configuration, click Apply to save the new settings.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Figure 7-1: Opening the Setup (Advanced Settings) Tab
Description
Enter a username and
password for the new user.
Confirm the previously
entered password.
Choose a User Group for
the user.
Figure 7-3: Add a User
51