3Xcloud Cross-Platform Web Client - Adding A V-Series All-In-One Camera - 3xLogic VX-2A-B-IWD User Manual

3XCLOUD CROSS-PLATFORM WEB CLIENT – ADDING A V-SERIES ALL-IN-ONE CAMERA
Steps:
1). To interface a VISIX All-in-One camera with a 3xCLOUD web client account, login to your
3xCLOUD account (www.3xlogiccloud.com).
Figure 4-27: Adding an All-in-One Camera to a 3xCLOUD Account
2). Click the button to open the Settings menu.
3). Select the Servers icon.
4). Click the
Server form. VISIX All-in-One devices are considered edge recording devices, and thus are
recognized as their own VIGIL Server within the VIGIL suite, including 3xCLOUD.
5). Click the By Serial No./Alias tab to configure the Server with a VIGIL Connect alias. If using
traditional network connection criteria is desired, click the By IP Address and Port button
enter in an IP and Port info (if using standard network connection criteria, also ignore step 6 of
these instructions) for the device.
6). Enter the VIGIL Connect alias of the desired All-in-One camera in the Serial No./Alias field
(VIGILTest1 used in the above example).
7). Fill in all required fields and click Add to save the All-in-One camera to your 3xCLOUD VIGIL
Server list.
The All-in-One camera should now be available to add to your 3xCLOUD layout. If you experience
connection issues, confirm the connection info (IP Address and Port/VIGIL Connect Alias) you entered is
correct. If all settings appear to be correct, contact 3xLOGIC for further instruction or reference
140028 VIGIL Connect Troubleshoot Guide
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
button (not pictured above). This will deploy the Add/Edit VIGIL
for troubleshooting tips.
Tech Tip
35