Mdns Settings; Ws-Discovery Settings - 3xLogic VX-2A-B-IWD User Manual

MDNS SETTINGS

Steps:
1). Opening the Setup Tab>Network Configuration drop-down menu and clicking the mDNS link
will open the network mDNS settings page.
Figure 7-54: Setup Tab –Network Configuration Menu – mDNS Settings
NOTE:
The multicast Domain Name System (mDNS) resolves host names to IP addresses within small networks
that do not include a local name server. It is a zero-configuration service, using essentially the same
programming interfaces, packet formats and operating semantics as the unicast Domain Name
System (DNS).
2). From the mDNS settings page, a user may check-off Enable to enable mDNS for this camera
and assign a device Name. Click Apply to save settings changes.

WS-DISCOVERY SETTINGS

Steps:
1). Opening the Setup Tab>Network Configuration drop-down menu and clicking the WS
Discovery link will open the network WS Discover settings page.
Figure 7-55: Setup Tab –Network Configuration Menu – WS-Discovery Settings
2). Check-off the Enable box to enable WS Discovery (Web Services Dynamic Discovery).
3). Click Apply to save settings changes.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
91