3Xlogic View Lite Ii Mobile (Android And Ios) - Adding A V-Series All-In-One Camera - 3xLogic VX-2A-B-IWD User Manual

3XLOGIC VIEW LITE II MOBILE (ANDROID AND IOS) – ADDING A V-SERIES ALL-IN-ONE CAMERA
Steps:
1). To interface a VISIX All-in-One camera with 3xLOGIC's View Lite II mobile app, launch the View
Lite II app on your mobile device (Android OS is pictured in the below screenshot, however,
the process is identical in the iOS version).
2). Tap the icon to deploy the Settings menu.
3). Tap the Servers menu option.
4). Tap Add VIGIL Server. This will launch the Add VIGIL Server form. VISIX All-in-One devices are
considered edge recording devices, and thus are recognized as their own VIGIL Server within
the VIGIL suite, including View Lite.
5). Enable VIGIL Connect. Alternatively, if you wish to use traditional network connection criteria,
leave VIGIL Connect disabled and enter in an IP/DNS Name and Port info (if using standard
network connection criteria, also ignore step 6 of these instructions) for the device.
6). Enter in the VIGIL Connect alias for the desired VISIX V-Series All-in-One camera (VIGILTest1
used in the above example).
7). Fill in the remaining required fields and tap Save to save the All-in-One camera to View Lite II.
A user may now add the camera stream to the View Lite viewer using the same process as
adding VIGIL Server or 3xCLOUD networked cameras.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Figure 4-26: Adding an All-in-One Camera to View Lite II
34