Add/Modify An Ftp Server - 3xLogic VX-2A-B-IWD User Manual

ADD/MODIFY AN FTP SERVER

Steps:
1). To add an FTP Server, click the Add... button (if modifying, select the desired schedule FTP
server from the list and click Modify...). The Add to/Modify FTP Notification List form will
deploy.
Figure 7-39: Setup Tab – Event Configuration Menu – FTP Notification Settings – Add/Modify an FTP
FTP Notification Setting
Name
Description
IP Address/Port
Target Directory
Account / Password
Filename Format
2). Click Test to test FTP connectivity. If the test fails, confirm the correct settings have been
entered for the selected FTP server.
3). Click OK to save the new FTP server settings.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Name the FTP server. This name will be used to identify this
particular FTP when assigning it to an e-mail notification.
Enter a description for the FTP. This information will be displayed
when the FTP is selected on the FTP Notification settings window.
Enter network connection values for the desired FTP Server.
Enter the target destination directory on the FTP for the FTP
notifications.
Enter the user login credentials for the FTP. 3xLOGIC recommends
using an administrative level account when possible to avoid
permissions conflicts.
Assign the filename format for the .jpg notifications.
78