Identifying The Camera On Your Network; Identifying Camera Ip Address; Manually Identify Camera Ip Address (Mac Address Hex Conversion) - 3xLogic VX-2A-B-IWD User Manual

Visix v-series all-in-one cameras
Hide thumbs Also See for VX-2A-B-IWD:
Table of Contents

Advertisement

2 Identifying the Camera on your Network

2.1 Identifying Camera IP Address

To begin viewing video or configuring a camera's network settings from the camera's web/browser
interface, the user must first identify the device's IP address. The default IP address of the camera is
192.168.XXX.XXX. The default subnet mask is 255.255.0.0.
On simple, private networks, a user can manually identify the IP address of the camera by converting the
camera's MAC address hex values, however, the alternative method, which is recommended by 3xLOGIC,
is to use the 3xLOGIC (VSX-IP) Camera Setup Utility. The utility makes detection and configuration of VISIX
camera's in any network environment simple and easy, regardless of network complexity.
Please install the camera before continuing. Neither of the below methods require an external internet
connection, however, the camera and the PC being used to communicate with it must reside on the same
network.

MANUALLY IDENTIFY CAMERA IP ADDRESS (MAC ADDRESS HEX CONVERSION)

Users can access the camera's web interface and settings using a device's default IP address: In case of
generic private network environment where IP address 192.168.XXX.XXX are used, the following procedure
can be used to identify a device's IP address.
Steps:
1).
Convert the device's MAC address to the IP address. Refer to Section 8:
Conversion Chart
label affixed to the side or bottom of the device).
MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177
Convert the last two sets of hexadecimal numbers to decimal numbers.
2).
Start the Microsoft® Internet Explorer/Edge web browser and enter the address of the device.
3).
Web streaming and device configurations are supported through ActiveX program. When the
ActiveX installation window appears, authorize and install the ActiveX.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
at the end of the manual (the MAC address of the device is written on the
Hexadecimal-Decimal
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VX-2A-B-IWD and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Vx-2ad3-iwdVx-2a-imd-xVx-vt-36Vx-2a-b-riwd

Table of Contents