Adding/Modifying A Logical Rule - 3xLogic VX-2A-B-IWD User Manual

ADDING/MODIFYING A LOGICAL RULE

Steps:
1). To add a logical rule, click the Add... button. If modifying an existing rule, select the rule from
the list and click Modify... Both actions will cause the Add/Modify New Rule window to
deploy.
Figure 7-71: Setup Tab –VCA Menu –Zones and Rules Settings – Logical Rules Form
2). Assign a Name and Description to the rule by filling in the respective fields.
3). Under the Trigger the Logical Rule when the Following Condition is Met text, a user may
select a condition clause. Some of these clauses will require secondary conditional clauses to
be chosen as well ([and], [or], etc...) Descriptions of the available condition clauses are listed
below:
Logical Rule - Clause
[rule]
[and]
[or]
[not]
[continuously]
[previous]
[was]
[time]
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Select this conditional clause to trigger the logical rule whenever a VCA
rule is true/active. Select the conditional trigger rule from the available
drop-down.
Select this conditional clause to trigger the logical rule whenever multiple
clauses are simultaneously true/active. Select the conditional clause from
the available drop-down. All chosen conditional clauses must be true to
trigger the logical rule.
Select this conditional clause to trigger the logical rule whenever one of
multiple clauses rules is true. Select each conditional trigger rule from the
drop-downs as necessary. Only one of the multiple configured rules must
be triggered/active to trigger the logical rule.
Select this conditional clause to trigger when a specified clause is not
true.
Select this conditional clause to trigger the logical rule whenever a clause
has been continuously true/false for a specified period of time.
Select this conditional clause to trigger the logical rule when a clause was
previously true/false for a specified period of time.
Select this conditional clause to trigger the logical rule when a clause was
true/false a specified period of time ago.
Select this conditional clause to trigger the logical rule during a specified
daily time range.
113