3).
Once notifications are enabled, a user may Add, Modify or Remove a counter reporting e-mail
notification recipient. When adding/modifying a recipient, recipient and report settings may
also be edited.
4).
Select a recipient from the list to display recipient information. To remove a recipient, select
the desired recipient from the list and click Remove.
5).
SMTP (E-mail Server) Settings must be configured in order for e-mail notifications to function.
Click the Go to SMTP (E-Mail) Settings link to open the SMTP settings form and configure
settings as necessary. See
ADD/MODIFY A COUNTER REPORT E-MAIL NOTIFICATION RECIPIENT
Steps:
1).
To add a recipient, click the Add... button (if modifying, select the desired recipient from the
list and click Modify...). The Add/Modify E-Mail Recipient form will deploy.
E-MAIL CONFIGURATION
Steps:
1).
In the E-Mail Configuration section of the form, a user may enter basic recipient info.
Figure 7-79: Setup Tab –VCA Menu - Counter Reporting Settings–E-Mail Notifications Tab – Add/Modify E-Mail Recipient
2).
Fill in the Name, Description and E-mail Address fields for the desired recipient.
E-Mail Recipient Setting
Name
Description
E-Mail Address
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
SMTP (E-Mail Server) Settings
Description
Name the recipient. This name will be used to identify this particular
recipient when assigning it to an e-mail notification.
Provide a brief description of the recipient (intended use, etc...). This
description will be displayed when the schedule is selected on the
schedule settings page.
Enter the e-mail address of the recipient.
for more info.
124