Table of Contents
Related Manuals for 3xLogic VISIX VX-VSS-20
Summary of Contents for 3xLogic VISIX VX-VSS-20
- Page 1 VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20 VISIX Stereoscopic People Counting Camera VX-VSS-20 Quick Start Guide v01-2018 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 2: Table Of Contents
4 IDENTIFYING AND CONFIGURING CAMERA ......................9 ......................9 DENTIFYING THE AMERA ON OCAL ETWORK ..........................10 OUNTING ONFIGURATION Configuration for Single Camera ........................10 Configuration for Multiple Cameras ........................11 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC... -
Page 3: Introduction
In conjunction with 3xLOGIC’s VIGIL video management suite of products, comprehensive data analysis and query processes can be easily established to help bolster loss-prevention capability and provide you with invaluable insights into your business via advanced reporting in VIGIL Client or VIGIL Trends. -
Page 4: Installation Specifications
1.1m(3.6ft) to door Placed in the 2/0.066 3.0/9.8 2.9/9.5 Placed in the middle middle 1.52m(5.0ft) to door Placed in the 3.5/11.5 4.0/13.1 middle Placed in the middle 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC... -
Page 5: Installation
The recommended mounting process is outlined below: Figure 3-1 Side-view diagram of mounting position Figure 3-2 Top-down Diagram of Mounting Position Figure 3-3 Image after Proper Installation 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC... - Page 6 VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20 1. Keep the 3xLOGIC logo facing the same direction as the Front arrow indicator on the back of the device. See below example for reference: Figure 3-4 Front Arrow and 3xLOGIC Logo 2.
- Page 7 Figure 3-10 Passenger flow in up-and-down (vertical) direction – Correct 1. The passageway width should be within the camera’s counting width threshold. Figure 3-11 Appropriate Counting Width Threshold 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC...
- Page 8 The counting mechanism may be falsely triggered by the door opening and closing Figure 3-13 Too far away from the door/Obstacle below camera Figure 3-14 Recommended installation 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC...
-
Page 9: Identifying And Configuring Camera
4 Identifying and Configuring Camera Identifying the Camera on Local Network Using the 3xLOGIC Camera (VISIX-IP) Setup Utility is recommended for any network environment as it will find all VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera information such as IP Address, Subnet Mask and Gateway Settings will be displayed and can be edited from this utility. -
Page 10: Counting Configuration
4. Save and Test Configuration: After configuration, click Save and begin testing the camera’s count accuracy. If the camera’s count is inaccurate, slightly adjust the detection line’s location and length until the desired results are achieved. 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC... -
Page 11: Configuration For Multiple Cameras
After configuring the camera’s people counting rule and testing its accuracy, the camera can be saved to VIGIL Server. To save the camera to VIGIL Server: 1. Return to the 3xLOGIC Camera (VISIX IP) Setup Utility interface (pictured in Section 4.1). 2. Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window. - Page 12 VIGIL Server’s Network Camera settings (see Fig 4-3). These values must be set to 3xLOGIC-VISIX-IP in both VIGIL Analytics Bridge and VIGIL Server to allow for successful operation. This setting should be automatically configured in VIGIL Server when adding the camera with the VISIX IP Setup Utility but if you are experiencing issues, confirm the device type settings are set to 3xLOGIC VISIX-IP in both applications.
- Page 13 Figure 4-11 VIGIL Analytics Bridge - Saving Changes Configuration is now complete. The VIGIL Server system will now record video as well as data based on the VX-VSS- 20’s detected people counting events. 12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC...
- Page 14 Toll Free: 877.3xLOGIC www.3xlogic.com © 2018 3xLOGIC Inc. All rights reserved. Information in this document is subject to change without notice. 3xLOGIC and the 3xLOGIC logo are trademarks of 3xLOGIC, Inc. all other trademarks are property of their respective owners.