MULTICAST NOTIFICATION
Steps:
1).
Opening the Setup Tab>Event Configuration drop-down menu and clicking the Multicast
Notification link will open the Multicast Notification settings page.
Figure 7-44: Setup Tab –Event Configuration Menu – Multicast Notification Settings
2).
From the Multicast Notification setting pages, a user may configure the following UDP
multicast settings:
Multicast Notification Settings
Address
Port
TTL
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Enter the UDP multicast notification destination's IP address.
Enter the UDP multicast notification destination's enter the
Port.
Set the TTL threshold.
The TTL threshold is a time value which delineates how long
a data packet can exist across an information network (local
intranet, internet, etc...) before being invalidated.
Approximation of TTL threshold value effects are listed
below:
0 - Restricted to the same host. Won't be output by
any interface.
1 - Restricted to the same subnet. Won't be
forwarded by a router.
<32 - Restricted to the same site, organization or
department.
<64 - Restricted to the same region.
<128 - Restricted to the same continent.
<255 - Unrestricted in scope; Global.
83