Import/Export Settings - 3xLogic VX-2A-B-IWD User Manual

Advanced Settings
Tracking Options
Display Options
Detection Point of
Tracked Items
Global Restore
Defaults
3). Click Apply to save settings. Click Restore Defaults to restore all VCA advanced settings to
their default state.

IMPORT/EXPORT SETTINGS

Steps:
1). Opening the Setup Tab>VCA drop-down menu and clicking the Import/Export link will open
the Import/Export VCA Settings page.
2). From the Import/Export VCA Settings page, a user may export or import an .xml containing
VCA configuration settings.
3). Click the Export button to download an xml file (vca_config.xml) to your browsers downloads
destination. This file can be imported to other cameras to assign them the same VCA
configurations as the device from which is was exported.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Configure the Minimum Tracked Object Size. Select Auto to only track
objects equal to or larger than the smallest object classification.
To configure a custom size, select the Blobmap Pixels option and enter the
desired value.
Configure a Minimum Alarm Object Display Time. Objects which have
triggered an event/alarm will display an alarm tracker (red object tracker)
for, at a minimum, the designated amount of time.
Configure a detection point for tracked objects:
1). Default - Default mode will use Centroid if calibrated as
overhead or Midbottom if calibrated as sideview or if the
camera is uncalibrated.
2). Centroid – Detection point for objects is at centroid.
Recommended for overhead camera
3). Midbottom – Detection point for objects is the Midbottom
region. Recommended for sideview or uncalibrated cameras.
Select Restore All Default VCA Settings to restore all VCA settings to their
factory default state.
Figure 7-83: Setup Tab –VCA Menu –Import/Export Settings
128