Automatically Identify Camera Ip Address With 3Xlogic Camera Setup Utility - 3xLogic VX-2A-B-IWD User Manual

AUTOMATICALLY IDENTIFY CAMERA IP ADDRESS WITH 3XLOGIC CAMERA SETUP UTILITY

Using the 3xLOGIC Camera (VSX-IP) Setup Utility is recommended for any network environment as it will
find all VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera
information such as IP Address, Subnet Mask and Gateway Settings will be displayed and can be edited
from this utility. To search for a device, launch the utility (VSXIPUtility.exe):
Steps:
1). Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window.
After clicking Detect Online Devices/ Change IP Address on the main page you will be taken to the
Online Devices window. A list of all VISIX devices discovered on your network will be visible.
2). To select a device, click on the desired device in the generated menu under the Select Online
Devices area.
3). To change an IP address for a selected VISIX camera in the Detect Online Devices window,
select the desired camera, click on the Change IP Address button. The fields under the
Configure IP Address area will un-grey to allow for manual editing of camera IP addresses as
well as other settings.
4). When you have finished editing the settings, click Save IP Address to save new changes.
5). Start the Microsoft® Edge/Internet Explorer web browser and enter the address of the device.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Figure 2-1: Detecting Online Devices
Figure 2-2: Identifying Device IP Address
12