Encoder Profile; Adding Or Modifying An Encoder Profile - 3xLogic VX-2A-B-IWD User Manual

ENCODER PROFILE

Steps:
1). Opening the Setup Tab>Video drop-down menu and clicking the Encoder Profile link will open
the Encoder Profile settings page.
2). From the Encoder Profile settings page, a user may Add, Copy, Modify or Remove an Encoder
Profile. An Encoder profile is a stream settings profile that delineates camera stream settings
based on pre-configured customized settings.
3). To Copy... or Remove.... an existing profile, select the profile from the list and click the
corresponding button.
For information on adding or modifying a profile, proceed through the following section of this manual.

ADDING OR MODIFYING AN ENCODER PROFILE

Steps:
1). To create or modify a new encoder profile, click the Add... button (if modifying, select the
desired profile from the list and click Modify...). This will deploy the below stream settings
form.
Figure 7-22: Setup Tab – Video Menu –Encoder Profile Settings – Adding/Modifying an Encoder Profile
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Figure 7-21: Setup Tab – Video Menu –Encoder Profile Settings
63