Motion Detection - 3xLogic VX-2A-B-IWD User Manual

MOTION DETECTION

Steps:
1). Opening the Setup Tab>Event Configuration drop-down menu and clicking the Motion
Detection link will open the Motion Detection settings page.
Figure 7-30: Setup Tab – Event Configuration Menu – Motion Detection Settings
2). From the Motion Detection settings page, a user may draw up to eight motion detection
zones, and activate each as necessary.
3). Check off the Enable column box for the desired zone. This will deploy the zone over the
image. Resize the zone as desired.
4). A Name, Description, Sensitivity and Object Size value can be assigned to each zone.
5). Enable Show Motion Blob to overlay a visualization of detected motion activity on the image
(the red squares in the above example).
6). Enable Show Motion Activity to deploy a motion activity graph as a video overlay (bottom-
right of the video preview in the above example). Motion activity will only be graphed when a
motion detection zone is actively selected within the image.
7). Click the Save button to save changes to motion detection settings.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
71