Classification Settings - 3xLogic VX-2A-B-IWD User Manual

Right-Click Option
Add Mimic
Pause
5). When you have calibrated the camera to your satisfaction, click Apply to save the new
calibration settings.
6). If desired, click Uncalibrate to reset all calibration specifications to their default value.

CLASSIFICATION SETTINGS

Steps:
1). Opening the Setup Tab>VCA drop-down menu and clicking the Classification link will open the
VCA object Classification settings page.
2). From the Classification settings page, a user may Add, Remove or modify an object
classification. Four default classifications exists: Clutter, Person, Group of People, and Vehicle.
3). To create a new classification, click the Add button and configure the required classifier
information. To modify an existing classification, select it from the list and edit the classifier
information as required. Classifier information is described below:
Classifier Info Description
Name
Name the classification.
Enable the classification to have the camera actively classify objects that meet
Enable
the classification's parameters. If disabled, the camera will not classify objects
with this class.
The minimum area (in square meters) taken up by an object of this
Min Area
classification.
Max Area
The maximum area (in square meters) of an object of this classification.
Min. Speed
The minimum travelling speed (in km/h) of an object of this classification.
Max. Speed
The maximum travelling speed (in km/h) of an object of this classification.
4). Click Apply to save the new classification settings.
5). Click Restore Defaults to reset the classifications to their default settings. This will delete any
custom classification.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Add another mimic to the live preview.
Pause the live preview image on the current frame.
Figure 7-72: Setup Tab –VCA Menu –Classification Settings
117