Quick Start - Remote Monitoring And Viewing - Adding A V-Series Camera To Vigil Client - 3xLogic VX-2V-MD-RIWH Quick Start Manual

Visix v-series all-in-one camera gen ii

Hide thumbs Also See for VX-2V-MD-RIWH:

Table of Contents

Quick Start - Remote Monitoring and Viewing - Adding a V-Series Camera to VIGIL

Client

Steps:

To interface a V-Series Camera with VIGIL Client:

Launch VIGIL Client (Local Mode only; VCM mode will only display Servers from a networked VCM Server)

and select Servers from the Servers top menu. This will launch the Servers window. VISIX V-Series

devices are considered edge recording devices and thus are recognized as their own VIGIL Server within

the VIGIL suite.

Click Add. This will deploy the Add/Edit VIGIL Server window.

Enable the Use VIGIL Connect option. If connecting using traditional network connection criteria is

desired, enter the cameras IP Address/DNS Name and confirm TCP/IP port status.

Enter in the VIGIL Connect alias of the desired V-Series Camera (VIGILTest1 used in the below example).

Skip this step if using traditional network connection criteria (IP/Port).

Click Test VIGIL Connect to confirm the camera can be communicated with through the Connect system

using the provided alias. Skip this step if using traditional network connection criteria (IP/Port).

If the test is successful, then VIGIL Client can successfully communicate with the Server. Click OK at the

bottom of the Add Server window after configuring all required fields to save the new Server to VIGIL

Client. For more information on configuring VIGIL Servers, please see Section 5.1 of the VIGIL Client

Users Guide.

NOTE: The camera will be visible in the Client treeview and will be represented by a

camera video stream can be added to the VIGIL Client viewer in the same manner as VIGIL Server

cameras; Simply extend the camera's drop-down menu and double click the icon to add it to the

viewer. Alternatively, a user can drag-and-drop the camera stream icon into the desired frame of

the VIGIL Client viewer.

For more information on configuring VIGIL Servers/V-Series All-in-One camera in VIGIL Client, please see

Section 5.1 of the VIGIL Client Users Guide

12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

V-Series Camera Quick Start Guide | VX-2V-MD-RIWH

Adding V-Series Camera to VIGIL Client

icon. The

Table of Contents