Recording - 3xLogic VX-2A-B-IWD User Manual

RECORDING

Steps:
1). Opening the Setup Tab>Storage drop-down menu and clicking the Recording link will open the
Recording storage settings page.
2). From the Recording settings page, a user may configure settings related to the cameras
recording functionality.
Configurable recording settings include:
Recording Setting Category
Recording Type
Recording Storage Options
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Figure 7-63: Setup Tab –Storage Menu –Recording Settings
Description
Select a recording mode for the cameras. The following modes
are:
Continuous – Select Continuous recording mode to

have the camera constantly record.
Event - Select Event recording mode to have the

camera begin recording based on an events (i.e.
motion detection, VCA tripwire, DIO etc...).
None – Select the None mode to use the camera as a

live-view only device.
Select a storage device from the drop-down menu.
If Continuous is selected as the Recording Type, the user
must select the storage Recycling mode. Choose Stop
Recording to halt recording when storage is at full capacity.
Choose Delete Files and Recycle (Oldest First) to continue
recording and overwrite the oldest files on the storage
device when storage has reached full capacity.
100