TCP SERVER
Steps:
1).
Opening the Setup Tab>Event Configuration drop-down menu and clicking the TCP Server link
will open the TCP Server settings page.
Figure 7-43: Setup Tab – Event Configuration Menu - TCP Server Settings
2).
From the TCP Server setting pages, a user may enter a Port value for the TCP Event Server.
Click the Message Customization button to deploy the event message settings for TCP Event
servers.
TCP Message Settings
Message Header Tab
VCA Tab
MD Tab
Network Tab
DI/DO Tab
3).
Click Apply to save changes to the TCP Server settings.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Enable and customize a custom message header.
Select a default message or configure a custom message for VCA Config,
VCA Alarm and VCA Counter events.
Select a default message or custom message for motion detection events.
Select a default message or configure a custom message for Network
events.
Select a default message or configure a custom message for DI/DO events.
82