Report Configuration - 3xLogic VX-2A-B-IWD User Manual

REPORT CONFIGURATION

Steps:
1). In the Report Configuration section of the Add/Modify Recipient window, a user may
configure an email counter report settings.
Figure 7-81: Setup Tab –VCA Menu - Counter Reporting Settings–E-Mail Notifications Tab – Report Configuration
Report Setting Description
Select Report All Data to report all counter data within the schedule range.
Time
If a custom range is desired, fill out the To and From fields to designate a time
range for the counter report.
Select the counter to report data on. An individual counter may be chosen by
Counter ID selecting its corresponding ID (1-19). Select Active to report on only active
counters. Select All to report on all counters.
Select the table(s) to use in the report. Each table features a separate
Table (Sampling) Sampling Interval and Roll-Over Count. See
information on configuring counter report tables.
Select whether the results should be displayed in Ascending or Descending
Sorting Order
order.
Select whether the displayed results should be Absolute value of each counter,
Value Type
or the Difference between counters.
Format Select the report format for the email counter report.
2). Click Send Test Report to send a test report using the currently configured settings to the e-
mail entered in the E-mail Configuration section.
3). Click OK to save the new recipient. Click Cancel to close the window without saving the
recipient.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Database Service Tab for more
126