Upnp Settings; Rtsp/Rtp Settings; Rtsp Configuration - 3xLogic VX-2A-B-IWD User Manual

UPNP SETTINGS

Steps:
1). Opening the Setup Tab>Network Configuration drop-down menu and clicking the UPnP link
will open the network UPnP settings page.
Figure 7-49: Setup Tab –Network Configuration Menu – UPnP Settings
2). From the UPnP settings page a user may enable UPnP. UPnP (Universal Plug and Play) is a set
of networking protocols that permits networked devices mobile devices to seamlessly discover
each other's presence on the network and establish functional network services for data
sharing, communications, and entertainment. UPnP is intended primarily for residential
networks without enterprise-class devices.
3). Check-off the Enable box to enable UPnP. A user may also enter a device name. The camera
model number will be used as the default name.
4). Click Apply to save changes to UPnP settings.

RTSP/RTP SETTINGS

Steps:
1). Opening the Setup Tab>Network Configuration drop-down menu and clicking the RTSP link
will open the network RTSP settings page.

RTSP CONFIGURATION

Figure 7-50: Setup Tab –Network Configuration Menu – RTSP/RTP Settings – RTSP Configuration
Steps:
1). Under the RTSP Configuration section of the RTSP settings page, a user may configure an RTSP
port (default is 554). The user may also enable and choose the RTSP Authentication Type
(digest or basic).
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
87