Heart Beat; Schedule - 3xLogic VX-2A-B-IWD User Manual

HEART BEAT

Steps:
1). Opening the Setup Tab>Event Configuration drop-down menu and clicking the Heart Beat link
will open the Heart Beat settings page.
Figure 7-33: Setup Tab – Event Configuration Menu – Heart Beat Settings
2). In network and computer science, a Heart Beat is a periodic signal generated by hardware (or
software) to indicate normal operation.
3). Check off Enable to activate a heartbeat signal from the camera.
After enabling, a user may configure the following options:
Stream Setting Description
Interval Configure the time interval between heart beat signal broadcasts.
TCP Server Enable a heartbeat signal broadcast via TCP Event Server.
TCP Notification Enable a heartbeat signal broadcast via TCP Notification.
Multicast Enable a heartbeat signal broadcast via UDP Multicast.
4). Click Apply to save Heart Beat settings changes.

SCHEDULE

Steps:
1). Opening the Setup Tab>Event Configuration drop-down menu and clicking the Schedule link
will open the Schedule settings page.
Figure 7-34: Setup Tab – Event Configuration Menu – Schedule Settings
2). From the Schedule settings page, a user may Add, Modify or Remove an event schedule.
When associated with a schedule, an event will trigger only during the specified time range.
3). Select a schedule from the list to display Schedule information.
4). To remove a schedule, select the desired schedule from the list and click Remove.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
74