Basic Configuration Menu - Tcp/Ip Settings - Ipv6 Settings Configuration - 3xLogic VX-2A-B-IWD User Manual

Visix v-series all-in-one cameras
Hide thumbs Also See for VX-2A-B-IWD:
Table of Contents

Advertisement

2).
From the TCP/IP settings page, a user may edit a camera's TCP/IP settings. This includes all
configurable settings from the Basic Tab>Camera Configuration> Network settings page (IP
Settings, DNS Server settings) as well as the ability to enable IPv6 and configure host name
and local link address details.
Network Setting
IP Address
Configuration
DNS Configuration
Host Configuration
Link – Local Address

BASIC CONFIGURATION MENU - TCP/IP SETTINGS - IPV6 SETTINGS CONFIGURATION

Steps:
a.
When the enable IPv6 box is checked, IPv6 settings fields will deploy (pictured below).
Figure 7-6: Setup Tab – Basic Configuration Menu – TCP/IP Settings – IPv6 Settings
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Select the method by which the cameras will obtain an IP address:
Obtain an IP Address via DHCP – Select this method to have your router's
DHCP function automatically assign the camera's network connection
settings. This method is enabled by default. The automatically-generated
IP, Subnet Mask and Gateway addresses will be listed directly
underneath.
Use the following IP Address (Manual Configuration) – Select this option
to manually enter network connection settings. IP Address, Subnet Mask
and Gateway Addresses can be manually entered directly underneath
this setting. Clicking the Test button will confirm the validity of the
network connection addresses you have entered.
To enable IPv6 protocol, click Enable IPv6. For more information on IPv6
settings, see
IPv6 Settings
Enter in Primary and Secondary DNS Server connection information.
Configure the device host name.
Checking-off Enable Auto-configuration Link-Local Address will generate
an alternate internal IP address which can also be used to connect to the
camera, access the UI via browser, etc... when on the same network as
the camera.
Configuration, below.
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-2ad3-iwdVx-2a-imd-xVx-vt-36Vx-2a-b-riwd

Table of Contents