Stream Settings - 3xLogic VX-2A-B-IWD User Manual

STREAM SETTINGS

Select your desired stream profile tab (First/Main, Second/Sub) and check-off Enable Streaming to
enable the chosen stream. In most cases, high quality image settings are reserved for the main/first
stream, while lower quality, less bandwidth-intensive settings are reserved for the second/sub stream.
The following settings can be configured for your chosen stream:
Stream Setting
Video Codec
Resolution
Max FPS
GOP
Profile Identification
Bit Rate Control
Steps:
1). Click the Show Profile List button for a list of preexisting encoder profiles. Existing profiles can
be loaded by selecting them from the list and clicking Load Profile Settings. Encoder profiles
can be configured from the
Profile).
2). Click Apply to save new settings changes.
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Select the stream's video codec from the options in the drop-down menu.
Select the stream's video resolution from the options in the drop-down
menu.
Set the maximum Frames per Second value for the selected stream.
Set the Group of Picture value (I-Frame interval) for the selected stream.
Configure bit rate settings for the selected streams:
Variable Bitrate (VBR) – Have the camera adjust bitrate for the

selected stream based on an image quality preference. Choose
your preference from the drop-down.
Constant Bitrate (CBR) – Configure a target bitrate for the

selected stream.
Encoder Profiles settings form (Setup Tab>Video Menu>Encoder
65