Network Configuration Menu; Tcp/Ip Setting - 3xLogic VX-2A-B-IWD User Manual

7.4 Network Configuration Menu

TCP/IP SETTING

Steps:
1). Opening the Setup Tab>Network Configuration drop-down menu and clicking the TCP/IP link
will open the network TCP/IP settings page.
Figure 7-45: Setup Tab –Network Configuration Menu – TCP/IP Settings
2). From the TCP/IP settings page, a user may edit a camera's TCP/IP settings. This includes all
configurable settings from the Basic Tab>Camera Configuration> Network settings (IP
Settings, DNS Server settings pages as well as the ability to enable IPv6 and configure host
name and local link address details). These settings can also be accessed via the Advanced
Tab>Basic Configuration Menu>Network Settings.
Network Setting
IP Address
Configuration
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Select the method by which the cameras will obtain an IP address:
Obtain an IP Address via DHCP – Select this method to have your

router's DHCP function automatically assign the camera's network
connection settings. This method is enabled by default. The
automatically-generated IP, Subnet Mask and Gateway addresses will
be listed directly underneath.
i. Use the following IP Address (Manual Configuration) – Select
this option to manually enter network connection settings. IP
Address, Subnet Mask and Gateway Addresses can be manually
entered directly underneath this setting. Clicking the Test button
will confirm the validity of the network connection addresses you
have entered.
ii. To enable IPv6 protocol, click Enable IPv6. For more information
on IPv6 settings, see IPv6 Settings Configuration, below.
84