MODIFY A USER
Steps:
1).
Click the Modify...button to modify an existing user profile. The Modify User form (pictured
right) will deploy.
Form Field
Username and Password
Confirm Password
User Group
2).
After finishing configuration, click Apply to save the new settings.
REMOVE A USER
Steps:
1).
Click the Remove button to remove an existing user profile. This action is only available when
a user profile is selected in the list.
2).
You will be prompted for a confirmation before finalizing the removal.
USER AUTHENTICATION
Steps:
1).
Check-off Enable Anonymous Viewer Login to enable anonymous viewing (no username or
password required) of the camera's live view.
TCP/IP
Steps:
1).
Opening the Setup Tab>Basic Configuration drop-down menu and clicking the Users link will
open the Users settings page.
Figure 7-5: Setup Tab – Basic Configuration Menu – TCP/IP Settings Form
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VIGIL Software v8.8 User Manual | VISIX V-Series All-in-One Cameras
Description
Enter a username and
password for the new user.
Confirm the previously
entered password.
Choose a User Group for
the user.
Figure 7-4: Modify a User
52