Operator Interface Software - Oce Arizona 250 GT User Manual

Operator Interface Software

Operator Interface Software
Introduction
The Arizona 250 GT software interface is displayed on the LCD monitor that is part
of the Operator Control Station. The interface has five main working modules that
are accessed by tabs located at the bottom of the display. Click on these tabs with the
mouse to access the modules. Print Job Control is the default module displayed when
the software interface has finished loading after the printer is switched on or reset.
The Print Job Control display is divided into functional and status areas. The
functional areas supports all operator input necessary to operate, maintain and
service the printer. The status areas are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device. For operations that require operator input, the
mouse is used to select either numeric characters from a virtual keypad or
alphanumeric charaters from a virtual keyboard. These virtual input screens are
displayed on the interface LCD monitor when data entry is required.
Illustration
[35]
[35] Interface Tabs
Operator Interface Module Tabs
[19]
[19] Interface Modules
Component
Print Job
Control
(Print tab)
Printer Metrics
(Metrics Tab)
Printer Settings
(Settings tab)
Service and
Diagnostics
52 Chapter 4 How to Navigate the User Interface
Function
Provides management of all aspects of working with print jobs
and also controls some features of the printer.
Provides information about the amount of ink consumed, the
amount of media printed and the number of print jobs started.
Also provides counters for the UV lamp bulbs use.
Displays information about, and also allows you to change
network connection settings, how units are displayed, the
language preference, and the date and time.
This area is reserved for use by trained field service technicians
only.
(1 – 2)