Oce Arizona 250 GT User Manual page 76

How to Power the Printer On and Off
How to Lock Out the Power Switch
Attention: Some simple maintenance and service procedures require locking
out the On/Off switch to ensure operator safety. When the switch is locked out,
it is impossible to supply power to the printer.
Turn the AC power switch to the Off position.
1.
Apply a lock and a tag-out label to the Lock-out area of the switch for the duration
2.
of any service or maintenance procedures.
Close the shutoff valves on top of the Carriage ink reservoir to prevent the ink from
3.
draining into the maintenance Station.
Open the shutoff valves again when the power is turned back on.
4.
When maintenance or service is complete, remove the lock and tag-out label and turn
5.
the AC power switch to the On position.
76 Chapter 5 How to Operate the Arizona 250 GT