Oce Arizona 250 GT User Manual page 141

The following table provides our recommended maintenance schedule. This is a
minimum requirement and some procedures may need to be done with greater
frequency. Each of the procedures is explained in detail in this section in the order
of frequency required as presented in this table.
[36]
[36] Maintenance Frequency
Procedure
Printhead Maintenance
Swab Printheads
Clean Carriage Underside
Remove Ink from Table
Empty the Waste Tray
Clean UV Lamp Filter
Refill Coolant
Clean Gantry Rails
Change Ink Filter
Change UV Lamp
Print a Nozzle Check
Reprint the Ruler
Linear Encoders
Frequency
Daily and as needed
Weekly and as needed
Daily and as needed
As needed
When ink is visible in maintenance station
Weekly and as needed
Monthly and as needed
Monthly and as needed
After 11 bags of ink or if pigment looks weak
When curing is insufficient
When print quality is insufficient or banding
occurs
When the ruler become unreadable
Yearly
Maintenance Guidelines
141