Oce Arizona 250 GT User Manual page 36

Safety Awareness
[12] How NOT to use the printer
Avoid these Situations For Your Personal Safety
[15]
[15] IGUS Hazard
[16]
[16] UV Lamp Hazard
Residual Safety Risks
The Arizona 250 GT is engineered to minimize machine components and operating
procedures that may compromise operator safety. However, in order to maintain
some machine operations and functionality, certain compromises are required. The
following table documents some of these residual hazards. By making the operator
aware of the potential risks, we hope to ensure maximum safety in the operation of
this printer.
Caution: there may be a time lag between when a print job is issued and when the
gantry movement actually begins as the UV lamps must warm up first.
36 Chapter 3 Safety Information
(3 – 3)
Avoid placing
fingers, hands or
other objects in the
IGUS track unless
power is off and the
printer is locked out.
Avoid looking at the
UV lamps, especially
if you are seated at
the same level as the
carriage.
Also do not touch the
UV lamp assembly or
the surrounding
guard as they will be
hot and may result in
burns of the skin.